Simrad CE33 ChartSounder User Manual

CE33 Miscellaneous menu Chapter 8-5
Save on DataCard
3
Press [3] to call up a new INFO window where you can see which
data will be transferred i.e. routes, waypoints, etc. and how much
space it will take up in bytes + percentage of max. storage capacity.
Choose which databank you wish to transfer the data to (use the +/-
keys). The actual date and time will be saved with the data transfer.
A name can be added for easy identification later on.
ENT
Press [ENT] to activate ‘Save on DataCard’
You will now receive a warning that existing data on the DataCard,
in the selected databank, will be overwritten. You can not ‘add more
information’ to data already transferred. Whenever transferring data
from a CE33 to Databank 1 or 2 on the DataCard, or from Databank
1 or 2 on DataCard to a CE33, the data package will replace the
entire capacity in the receiving unit.
Load from DataCard
9
Press [9] to call up a new INFO window where you can see which
data is stored in Databank 1 or 2 on the DataCard.
+/-
Use the +/- keys to toggle between DATABANK 1 and 2
Load: DATABANK-1
Data generated by: Simrad CE33
Saved: 15-02-2002 19:43:00
Name:
Data type Amount Size Select
Marks/WP: 11 256 ON
Lines: 1 80 ON
Routes: 1 96 ON
Targets: 3 72 ON
Tracks: 0 0 ON
Setup: 1 1745 OFF
Destination memory: 504 bytes = 0%
MENU
Exit Load
ENT
ENT
Press [ENT], [ENT] to transfer a copy of the data in DATABANK
1 to the internal memory in the CE33 unit. Any existing data in the
internal memory will be overwritten.

Simrad CE33 ChartSounder Specifications

General

Brand	Simrad
Model	CE33 ChartSounder
Category	Marine GPS System
Language	English