CE33 Pilot menu & navigation examples Chapter 6-5
6.2.2 Navigation setup
If you wish to make any changes in the navigation setup, you can
quickly enter the navigation setup display by pressing [ENT] from
the highway display (graphical steering display).
ENT
Quick access to navigation setup from active highway display, or...
-refer to display example and description of functions in section 6.1.
6.2.3 Pilot mode - Turn NAV off
MENU
Call up the menu bar, and...
4,2
turn off navigation mode
6.2.4 Pilot mode - Waypoint advance
MENU
Call up the menu bar, and...
4,3
activate shift to next waypoint
-it will require that navigation mode is active and that “a next way-
point” exists.
6.2.5 Pilot mode - Restart to approaching point
MENU
Call up the menu bar, and...
4,4
activate restart to approaching point
-if you for some reason have drifted off course and wish to restart
navigation from your actual position to the approaching point.
6.2.6 Pilot mode - ETA & AVN
MENU
Call up the menu bar, and...
4,5
load the ETA & AVN display
-it will require that navigation mode is active - see display example
next page.