Simrad CE33 ChartSounder User Manual

CE33 Pilot menu & navigation examples Chapter 6-3
Navigation mode - RHUMBLINE navigation is used for shorter
distances, and GREAT CIRCLE for long trips, especially when
crossing at high latitudes. COMPOSITE navigation is used when all
the legs in a route are not set to the same navigation mode.
Auto waypoint shift - can be set to WP-circle, WP-line or OFF.
When set to WP-circle, the system will change to the next waypoint
in the route after passing the circle line (border).
When set to WP-line, the system will change to next waypoint in the
route after passing the waypoint line (border).
When “Auto waypoint shift” is set to WP-circle, then the alarm
function at the waypoint’s circle will not be activated.
6.2 Pilot menu - with NAV active
4
PILOT
1
Highway - see section 6.2.1
2
Turn NAV off - see section 6.2.3
3
WP advance - see section 6.2.4
4
Restart to approaching point - see section 6.2.5
5
ETA & AVN - see section 6.2.6
6
Trim & highway - see section 6.2.7
7
Set & drift - see section 6.2.8
This PILOT menu will appear when navigation mode is active.
If the selected navigation mode is Waypoint navigation, then point 3:
WP advance will not be available and therefore the color of the text
will differ from the rest of the menu text.
See also section 6.1 Pilot menu - with NAVin active, section 6.3
Anchor guard, section 6.4 MOB navigation and 6.5 Navigation
examples.

Simrad CE33 ChartSounder Specifications

General

Brand	Simrad
Model	CE33 ChartSounder
Category	Marine GPS System
Language	English