Simrad CE33 ChartSounder - Cursor Placed on Target

CE33 Chart menu and INFO windows Chapter 3-13
3.3.7 Cursor placed on target
ENT
With chart in active page, and cursor placed on a target symbol,
press [ENT] to call up an info window with the following to choose
from - text in red are inactive functions:
Target found
Name: TARGET 1
LAT 57°02.825N
LON 7°45.555E
1
Edit user data
2
Chart info
Refer to Appendix C
3
Find nearest port services
Refer to Appendix C
4
Bearing and dist from A to B
Refer to section 3.3.2
9
Chart setup
Refer to section 3.4
0
Cursor to center
Refer to section 3.3.2
PAGE
More user data
MENU
Exit
Exit info window
1
Edit user data opens for a new info window:
Target
1
Edit
Edit name, color, position etc.
2
Move
Move point with cursor
CLR
Delete
Delete target
MENU
Exit
Exit info window
PAGE
More user data will toggle between available data on cursor’s posi-
tion