Chapter 8-6 CE33 Miscellaneous menu
MENU
Press [MENU] to exit and *reboot (only if loading “Setup”)
*) When the system makes a ‘reboot’ the screen will turn black for a
brief moment, then the system will re-start and automatically return
to the active display which was on the screen before you made the
transfer.
8.5 Data transfer via PC interface
Data transfer to and from a route planning program on a Personal
Computer can be made via NMEA connection (see section 10.7) by
means of the standard NMEA0183 sentences WPL and RTE.
The data transfer on these two sentences does not include WP sym-
bol, color, XTE limit, etc. Refer to section 10.6 for information on
connection to PC.
MENU
Call up the menu bar, and...
6,4
load the Data transfer window
Data transfer
1
DataCard - see section 8.4
7
NMEA connection
MENU
Exit
7
Select the NMEA connection
WARNING!
Normal NMEA communication
will be interrupted.
MENU
Exit Accept
ENT
To Next Page
Loading...
Need help?
General
