Index CE33 ChartSounder
Echosounder functions - continued,
- color threshold 7-11,A-3
- data field 7-3
- demo mode 7-9
- depth 7-9,A-3
- depth grid 7-11
- effects of the vessel’s speed 7-14
- event marker 7-6,A-4
- expansion window 7-11,A-4
- frequency 7-9,A-4
- gain 7-11,A-4
- hotkey 7-2
- how the echosounder works 7-12
- menu 7-2
- operation 7-1
- ping to ping filter 7-11,A-4
- plot waypoint from echogram 3-15
- presentation setup 7-11
- range 7-3,7-11,A-5
- return to sounder presets 9-13
- sampling 7-9
- scroll speed 7-11,A-5
- scroll synchronization 7-11,A-5
- selecting displays 7-1,7-2
- setup 7-9
- set vertical mark 3-15
- signal threshold 7-11,A-5
- standard display 7-3
- time / distance scale 7-9
- transducer 7-9,A-5
- transducer beamwidth 7-13
- transmission line 7-3
- transmit power 7-11,A-5
- transmit pulse length 7-11,A-4
- TVG 7-11,A-5
- variable range marker 7-7
- VRM expansion 7-5,A-6
- white line 7-11,A-6
Electrical connections 10-7
- fuse 10-8
- interface NMEA0183 10-8
- optional 10-9
- power supply 10-8
- transducer 10-8
ETA & AVN display 6-5,A-1
Factory settings 9-13
- master reset 9-14
- power off - reset 9-14
- return to all factory presets 9-13
Fundamentals 2-1
Global Positioning System 1-1
Glossary of terms A-1
GOTO function 3-14
- advance to next point 3-14
- restart to approaching point 3-14
- select NAV mode 3-14
- turn NAV off 3-14
GPS receiver type 9-2
How to get started 1-3
HDOP limit 4-10
Info windows 3-7
- cursor active but not placed on
any object or data 3-8
- cursor inactive 3-7
- cursor placed on route leg or
line section 3-10
- cursor placed on routepoint or
linepoint 3-11
- cursor placed on target 3-13
- cursor placed on trackpoint 3-12
- cursor placed on waypoint 3-9
- GOTO function 3-14
- PLOT function 3-15
Initial start-up 2-7
Installation,
- antenna DGPS MGL 3 10-6
- antenna GPS RS5640 10-6
- basic transducer and cable
information 10-10
- CE33 10-3
- determining the position for
the transducer 10-13
- DS33 10-5
- Operation of DS33 10-5