CE33 ChartSounder Index
Installation - continued,
- location for display unit 10-4
- notes 10-1
- sources of noise 10-14
- transducers (optional) 10-11
Interface setup, alarm output 9-8
Interface setup, NMEA 9-4,A-2
- default sentences 9-5
- description of sentences 9-6
- return to NMEA presets 9-13
Interface software version 9-2
Introduction 1-1
Key functions 2-3
-dedicated function keys 1-3
Key symbols in manual 1-2
Language 2-8,9-2
Light & contrast 2-7
Lines,
- delete all 9-13
- draw new line 3-15
- edit via chart 3-10,3-11
- edit via menu 5-10
- line list 5-9
- stored in the memory 5-9
Local time and date 4-1
Log 4-1,4-3
- reset 4-3
- speed calibration 9-1,A-1
- speed sensor 9-1
Loran C 9-10
- list of Loran C chains 9-11
Maintenance 10-15
Master reset 9-14
Measurement units A-2
- setup 9-1
Memory,
- delete 9-13
- used 9-13
Menu bar 2-4
Menu layout 2-5
Miscellaneous menu 8-1
MOB function back of front cover
- alarm and navigation 6-9
- check last activated MOB 6-9,8-3
- turn MOB function off 6-9
Naming of routes, points, etc. 2-7
Navigation,
- advance to next point 3-14
- Approx.Velocity Necessary 6-6
- auto waypoint shift 6-2
- chart / cursor navigation 6-10
- Estimated Time of Arrival 6-6
- examples 6-10
- highway display 6-4
- orientation on chart 3-18
- restart to approaching point 3-14
- route navigation 6-13
- setup 6-2
- simulator 9-7,A-2
- track navigation 6-15
- turn navigation off 3-14,6-11
- waypoint navigation 6-11
NMEA interface 9-4
- return to NMEA presets 9-13
Page system 2-1
- preset pages 2-2
- rotation inverval 9-2
Palette setup 9-12
PC up/download via NMEA 10-8
PDOP limit 4-10
Pilot menu,
- ETA & AVN 6-5, A-1
- highway display 6-1,6-4
- hotkey 6-1,6-10
- NAV active 6-3
- NAV inactive 6-1
- restart to approaching point 6-5
- set & drift 6-8
- trim & highway display 6-7
- turn NAV off 6-5
- waypoint advance 6-5
PLOT function 3-15
- draw line 3-15
To Next Page
Loading...
Need help?
General
