Simrad CE33 ChartSounder - Page 166

Index CE33 ChartSounder
PLOT function - continued,
- make route 3-15
- plot ship’s position as WP 3-15
- plot target 3-15
- plot waypoint 3-15
- set vertical mark 3-15
Position
- display 4-1
- menu 4-1
- setup 4-3
- start 4-3
Power off 2-8
Power on 2-7
Repair and service 10-15
Routes,
- calculation 5-8
- delete all 9-13
- edit via chart 3-10,3-11
- edit via menu 5-4,5-5,5-6
- make new route from WP list 5-6
- menu 5-1
- navigation 6-13
- navigation setup 6-2
- plot new route 3-15
- route list 5-3
- stored in the memory 5-3
- time to go 5-8
Safety summary 1-2
Satellite status 4-9
Satellites in SDGPS system 4-15
- tracking state 4-15
Serial number 9-2
Setup menu 9-1
Show test display 9-13
Software version 9-1
Specifications 10-16
Speed,
- average 4-5
- diagram 4-7
- display as SOG/STW 4-4
- dual speed display 4-5
- filter 4-3
Speed - continued,
- over ground 4-1,4-6
- setup 9-1
- through water 4-5
Status indicator and accuracy 4-2
Symbols 2-7
Targets,
- delete all 9-13
- edit via chart 3-13
- plot new target 3-15
- setup / edit target 5-14,5-15
- stored in the memory 5-14
Track function 5-11
- auto trackpoint shift A-1
- delete all 9-13
- display track 5-11
- edit via chart 3-12
- edit via menu 5-13
- interval 5-11
- line type 5-12
- navigation 6-15
- navigation setup 6-2
- start / stop track 5-11
- stored in the memory 5-12
- trackpoints 5-11
Troubleshooting 10-15
UTC time and date 4-1,4-3
War ranty end of manual
Waypoints,
- auto waypoint shift A-1
- delete all 9-13
- edit via chart 3-9
- edit via menu 5-2
- menu 5-1
- navigation 6-11
- navigation setup 6-2
- plot new waypoints 3-15
- stored in the memory 5-1
- WP list 5-1
Wind display 8-1
- setup 8-2