NAVIGATING WITH THE CS66
20221859 / F 95
3 Start sailing along the quick route
by selecting the Navigation menu
and tapping the Start command. It
is also possible to start the function
by tapping the F1 key or the
QUICK ROUTE key on the
optional COP30.
− When activated the AIS voyage
data dialog will pop up. By
selecting Update AIS the AIS will
be automatically updated
− The display will now change to
show bearing and planned speed as
shown in the figure to right.
When the route is started, it will
automatically be saved as Quick Route,
and may be treated as any preplanned
route created in the Route Editor
window.
When a quick route is started it will automatically overwrite
previously saved quick routes.
The voyage is aborted by tapping the Navigation menu
followed by the Stop command.
The voyage may also be aborted by tapping the STOP NAV. key
on the optional COP10/30.
To Next Page
Loading...
