Simrad CS66
118 20221859 / F
7 Verify that the color for the diagonal lines can be clearly
distinguished from each other. If not, the monitor has to be
sent to Simrad for recalibration.
10.6 Preventive maintenance intervals
Local evaluations should be made to determine site-specific
maintenance intervals.
ACTION INTERVAL RECOMMENDED
Clean operator panels and
cabinet surface
Each month
Clean or if required replace air
inlet fan dust filter on MC50
Each month
Check for loose connectors and
wires
Once a year
Check for defective shock
absorbers on MC50
Once a year
Verifying the display color Once a year
Change fans on MC50 Once each three years
To Next Page
Loading...
