Simrad CS66
60 20221859 / F
The danger alarm function is disabled when the ship speed is
less than 2 knots, or when the pre-warning time is set to 0
minutes.
6.3 Displaying information about danger objects
When the danger alarm function is active, it is possible to view
information about the objects/areas that are defined as dangerous
or caution area. The dialog is activated by tapping the Setup
menu followed by Danger Alarm and Danger Objects Info
commands.
The content in the dialog will be updated according to the pre-
warning time and the pre-warning sector settings. Refer Danger
alarm settings, page 58.
To Next Page
Loading...
Need help?
General
