Simrad CS66 - 3.1 Operator panels

Simrad CS66
10 20221859 / F
3.1 Operator panels
A standard CS66 system is delivered with a Cherry keyboard
and with a TrackMan
®
Wheel. The Cherry keyboard and the
TrackMan wheel may be replaced by a COP20 or a COP30
Operator panel.
An optional COP10 may be included for remotely operating the
CS66 system.
Cherry keyboard
The keyboard is used for entering characters in the different
dialog boxes.
Several function keys are pre-defined as short-cut keys. Refer
Tool bar, page 19.
The arrow keys in the lower right corner of the keyboard may be
used for selecting chart scale. Refer Selecting the chart scale,
page 51.
The Cherry keyboard has no internal illumination. External
illumination must be installed to ensure that all key labels can be
read under different light conditions!
TrackMan
®
Wheel
The TrackMan
®
Wheel is used to position the cursor on the
screen.
The cursor keys have the following functions:
• Left key is used to click on keys and operate menus.
• Right key is used to display the Object information dialog.
Refer