NAVIGATING WITH THE CS66
20221859 / F 91
7.9 Printing a route
All waypoints in a route may be printed if a printer is connected
to the CS system. The function is started by using one of the
following procedures:
− Tapping the Navigation menu followed by the Print
command
− When the Route Editor window is active, tapping the
Route menu followed by the Print Route command
− By tapping the Print key in the Route Editor window
7.10 Deleting a route
A saved route is deleted from the CS66 system by selection the
Navigation menu followed by the Delete command.
− The Delete route dialog is displayed.
Select the route that is to be deleted, and confirm the entry by
tapping OK.
To avoid that a route is unintentionally deleted, the command is
password protected.
Type “1234” in the Password field, and confirm the entry by
tapping OK.
7.11 Exporting routes
Routes created in a CS66 system may be exported for use in
other CS66 systems, or as a backup routine.
A saved route is exported by selection the Navigation menu
followed by the Export command.
− The dialog box for selecting route name will be displayed.
To Next Page
Loading...
