Simrad CS66
102 20221859 / F
Calculate position
Used for calculating the coordinates for a new point from a
given position, and with known range and bearing from this
position.
The position may be calculated by using different methods:
− Entering the known position, distance and bearing in the
From, Distance and Bearing fields, and then tapping
Calculate
− Positioning the cursor in the chart and pressing the left
cursor key to set the From position, entering known
values for Distance and Bearing, and then tapping
Calculate
Calculated position is displayed in the grayed fields.
Calculate range and bearing
Used for calculating range and bearing between two known
positions.
The range and bearing are calculated by using one of the
methods described below:
− Entering coordinates for known positions in the From and
To fields, and then tapping Calculate
− Positioning the cursor in the chart and pressing the left
cursor key to set the From position, and entering known
values To field. Range and bearing will be calculated by
tapping Calculate
− Positioning the cursor in the chart and pressing the left
cursor key to set the To and From positions. A line will
then be drawn in the chart between the To and From
points, and range and bearing will be calculated by
tapping Calculate
The line is removed from the display by moving the cursor to
one of the end points and pressing the right cursor key.
Calculated range and bearing are displayed in the grayed fields.
To Next Page
Loading...
Need help?
General
