TOOLS FOR SAFE NAVIGATION
20221859 / F 65
The following settings are available:
Tracking Type:
Log on time: Track points drawn with time lag
according to Minimum Time setting.
Log on distance: Track points drawn with distance
according to Distance setting.
Log on width: Track points drawn if the vessel exceeds
the width entered in Width setting.
Tracking Intervals:
Minimum Time: Time between each logging point.
Distance: Distance between each logging point.
Width:
Defines a deviation width for the vessel
track. A track point will now be set each
time the vessel shifts the defined distance
to the right or left. This means that the
sharper a turn is, the more track points
will be set. E.g. if the vessel moves
perfectly straight only two points will be
set. One in the beginning and one in the
end of the track.
Show track:
Shows/hides the tracking line on the display.
3 Close the dialog and start tracking the selected vessel’s
movement by tapping OK
− If the Show Track tick box is active, the track will be
visible on the display
If information about a target is lost while this target is being
tracked, the track will automatically be saved and displayed in
the chart. The track will however not be an active track, and is
removed from the display by selecting the Tracking menu
followed by the Unload Track command.
Refer Displaying or deleting previously saved tracks, page 67.
To Next Page
Loading...
Need help?
General
