94
When re-assembling, push the left/right hinges to the right to fix them to the frame, and
connect 3 links.
Top Cover
7. Remove the rear cover, the left side cover and right side covers from the base unit.
8. Remove the Operation Panel.
9. Remove the 2 bolts at the left top of the frame.
10. Remove the 3 bolts at the right side of the frame, and then lift up the top cover to
separate it from the base unit.
Paper Exit Cover
1. Remove the rear cover.
2. Remove the 2 bolts at the left and right sides, and then pull the paper exit cover to
the front to separate it from the base unit.
To Next Page
Loading...
