Sindoh M612 - Error Log Printing and Clearing

199
Error Log
Error log
■ Print Log
Error log can be printed from additional diagnostic information.
To print error log,
M611/M616
M612/M617
1. Select Error log in the diagnostic
mode.
2. Select Print log to start to print
3. Press [Back] to exit..
1. Select General Service in the diagnostic
mode.
2. Select Print Error log to start to print
3. Press [Exit] to exit..
An example of error log:
00-102, [102 Tray2 Miss Feed Jam]  Refer to Error code list
Error type: Recoverable  Indicate (Non)Recoverable
Date: 2014-01-09 06:30:44  Time of Error
 Clear Log
M611/M616
M612/M617
1. Select Error log in the diagnostic
mode.
2. Select Clear log, and then Are you sure
to clear? message pops up to make sure
again.
3. Select Yes to clear log. Select No not to
clear log.
4. Press [Back] to exit..
1. Select General Service in the diagnostic
mode.
2. Select Clear Error Log, and then Are
you sure to clear? message pops up to
make sure again.
3. Select Yes to clear log. Select No not to
clear log.
4. Press [Back] to exit..