Sindoh M612 - Network Port Filtering Configuration

200
Port Filter
Port Filter
In Port Filter
Select Enable to change the setting in Filter to Enable. The port cannot be used due to this
setting.
Select Didable to change the setting to Disable. The port can be used.
A. FTP
1. Enable (Filter On, Port disable to use)
2. Disable (Filter Off, Port able to use)
B. SSH
1. Enable (Filter On, Port disable to use)
2. Disable (Filter Off, Port able to use)
C. TELNET
1. Enable (Filter On, Port disable to use)
2. Disable (Filter Off, Port able to use)
D. HTTP
1. Enable (Filter On, Port disable to use)
2. Disable (Filter Off, Port able to use)
E. SNMP
1. Enable (Filter On, Port disable to use)
2. Disable (Filter Off, Port able to use)
F. IPP
1. Enable (Filter On, Port disable to use)
2. Disable (Filter Off, Port able to use)