Sindoh M612 - Page 172

166
2. Press Cancel not to print as it is.
Output Bin Stack Full
Error
The problem occurs when the exit tray is full with paper.
1. Remove the paper from the exit tray
Paper Empty: T1
The problem occurs when sending any job to the tray1
with no paper on it.
1. Check the status of Tray1 Empty Sensor flag.
2. Check if Tray1 Empty Sensor works normally.
3. Replace the sensor and test it again if it does not work
normally.
Paper Empty: T2
The problem occurs when sending any job to the tray2
with no paper on it.
1. Check the status of Tray2 Empty Sensor flag.
2. Check if Tray2 Empty Sensor works normally.
3. Replace the sensor and test it again if it works
abnormally.
Paper Empty: T3
The problem occurs when sending any job to the tray3
with no paper on it.
1. Check the status of Tray3 Empty Sensor flag.
2. Check if Tray3 Empty Sensor works normally.
3. Replace the sensor and test it again if it works
abnormally.
Paper Empty: MPT
The problem occurs when sending any job to the MPT with
no paper on it.
1. Check the status of MPT Empty Sensor flag.
2. Check if MPT Empty Sensor works normally.
3. Replace the sensor and test it again if it does not work
normally.
100 MPT Miss Feed
Jam
The problem occurs when the paper does not arrive at the input
sensor within a certain period of time after having tried to pick up
at MPT.
1. Check if the paper is stacked properly in the tray.(check the
paper guide)
2. Check if the paper is loaded too much in the tray.
3. Check the paper status.( damaged paper ?)
4. Check any foreign substance on the paper path between the
tray and the input sensor.
5. Check if the pickup solenoid is working properly in picking up
the paper.
6. Replace the solenoid and test it again if it works abnormally.
101 Tray1 Miss
Feed Jam
The problem occurs when the paper does not arrive at the input
sensor within a certain period of time after having tried to pick up
at the base unit tray.(If paper pickup is failed at the tray, there
may not be jammed paper on the paper path although 101 Tray1
Miss Feed Jam error message appears)
1. Check if the paper is stacked properly in the tray.(check the
paper guide)
2. Check if the paper is loaded too much in the tray.
3. Check the paper status.( damaged paper ?)
4. Check any foreign substance on the paper path between the