EasyManua.ls Logo

Sintratec S1 - Cleaning and servicing; Safety; Cleaning

Sintratec S1
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and servicing
48 / 76 Sintratec S1 BA_S1_en 1.1
Pos: 153 /Sintratec /Überschrift en/1. Ebene/Reinig ung und Insta ndhaltung @ 3\mod_14640 86535541_65 56.docx @ 9318 @ 1 @ 1
8 Cleaning and servicing
Pos: 154 /Sintratec /Überschrift en/2. Ebene/Q - T /Sicherheit @ 3\mod_1463 981241743_6 556.docx @ 842 1 @ 2 @ 1
8.1 Safety
Pos: 155 /Sintratec /Kap./Reinigung & Instandh altung/Allgmein er Gefahrenhinweis @ 3\m od_14664909871 71_6556.docx @ 9628 @ @ 1
When working at the device, various hazards can arise according to the situation; it
is important to heed the following warnings in this regard.
Pos: 156 /Sintratec /Warnhinweise/ GEFAHR - Tod/GEFAHR - Spannungsführe nde Teile @ 3\mod_146398 1287267_6556. docx @ 862 4 @ @ 1
DANGER
Danger of death due to electric shock
Contact with live components is potentially fatal
Live components can move unexpectedly and there is thus a risk of injury.
Work on electrical systems may be carried out only by authorised electricians.
Switch off the device via the main switch prior to starting cleaning tasks.
Disconnect the device from the power supply system (pull out the mains plug)
prior to starting servicing tasks.
Disconnect the device from the power supply system (pull out the mains plug)
prior to starting work on the electrical system.
Pos: 157 /Sintratec /Warnhin weise/Hinweis/Hinw eis - Arbeite n am elektrisch en System nur durch Fachperson al @ 3\ mod_146650535610 6_6556.doc x @ 9668 @ @ 1
Note
Work on electrical systems may be carried out only by appropriately
qualified electricians.
Pos: 158 /Sintratec /Warnhin weise/WARNUNG - Lebensgefahr/ WARNUNG - Verbrennungsg efahr @ 3\mo d_146607724 2166_6556.doc x @ 9485 @ @ 1
WARNING
Risk of burns
The inside of the device is subject to very high temperatures during operation. After
the door is opened, there is a risk of burns due to high surface temperatures. The
printed part is also hot.
Prior to carrying out maintenance tasks or tasks of a similar nature, allow the
device to cool down.
Wear suitable protective gloves.
Pos: 159 /Sintratec /Warnhinweise/ VORSICHT - Verletzungsgef ahr/VORSICHT - Schnitt verletzungen @ 3 \mod_14639813 10410_6556. docx @ 8648 @ @ 1
CAUTION
Sharp edges
There is a risk of being cut at sharp edges.
Wear protective gloves.
Work with care.
Pos: 160 /Sintratec /+++++++ + Seitenumbruch +++ +++++ @ 3\ mod_146398 1070991_0.docx @ 7762 @ @ 1

Table of Contents