Operation
Sintratec S1 BA_S1_en 1.1 41 / 76
Pos: 143 /Sintratec /Kap./Betrie b/Parameter einstell en @ 3\mo d_146642486 2603_6556.docx @ 9618 @ 3 @ 1
7.3.4 Setting parameters
Various parameter settings for the print process can be selected or individually
determined according to the powder used. A choice can be made between the
standard "Sintratec PA12" parameter settings (for the "Sintratec PA 12 Black"
powder) or individual parameter settings.
Note
Details on parameter settings can be found in the Sintratec Academy, in the
"Software" area under the ‘Tab "2. Parameters"’ section.
1. In "Sintratec Central", select the "2. Parameters" tab.
Fig.
: "2. Parameters" tab
2. Use the standard parameter settings for the sample print object:
– Sintratec PA12 Black
– Layer thickness: 100 μm
– Quality: "Strength"
3. Optional setting: If "Show preview" is selected, a view feature for the layers is
activated.
To Next Page
Loading...