Sintratec S1 - Faults and problems; Safety; Action in case of faults and problems

Faults and problems
Sintratec S1 BA_S1_en 1.1 59 / 76
Pos: 192 /Sintratec /Überschrift en/1. Ebene/Störu ngen und Proble me @ 3\m od_14639811 37549_6556.doc x @ 7986 @ 1 @ 1
9 Faults and problems
Pos: 193 /Sintratec /Überschrift en/2. Ebene/Q - T /Sicherheit @ 3 \mod_1463 981241743_6556. docx @ 842 1 @ 2 @ 1
9.1 Safety
Pos: 194 /Sintratec /Kap./Reinigung & Instandh altung/Allgmein er Gefahrenhinweis @ 3\mod_ 14664909871 71_6556.docx @ 9628 @ @ 1
When working at the device, various hazards can arise according to the situation; it
is important to heed the following warnings in this regard.
Pos: 195 /Sintratec /Warnhinweise/ GEFAHR - To d/GEFAHR - Spannungsführe nde Teile @ 3\mod_1463981 287267_6556.d ocx @ 8624 @ @ 1
DANGER
Danger of death due to electric shock
Contact with live components is potentially fatal
Live components can move unexpectedly and there is thus a risk of injury.
• Work on electrical systems may be carried out only by authorised electricians.
• Switch off the device via the main switch prior to starting cleaning tasks.
• Disconnect the device from the power supply system (pull out the mains plug)
prior to starting servicing tasks.
• Disconnect the device from the power supply system (pull out the mains plug)
prior to starting work on the electrical system.
Pos: 196 /Sintratec /Warnhinweise/ WARNUNG - Lebensgefahr/ WARNUNG - V erbrennungsgef ahr @ 3\mo d_14660772421 66_6556.doc x @ 9485 @ @ 1
WARNING
Risk of burns
The inside of the device is subject to very high temperatures during operation. After
the door is opened, there is a risk of burns due to high surface temperatures. The
printed part is also hot.
• Prior to carrying out maintenance tasks or tasks of a similar nature, allow the
device to cool down.
• Wear suitable protective gloves.
Pos: 197 /Sintratec /Warnhinweise/ VORSICHT - V erletzungsgef ahr/VORSICHT - Schnittverl etzungen @ 3\m od_146398131 0410_6556.doc x @ 8648 @ @ 1
CAUTION
Sharp edges
There is a risk of being cut at sharp edges.
• Wear protective gloves.
• Work with care.
Pos: 198 /Sintratec /+++++++ + Seitenumbruch ++++ ++++ @ 3\ mod_146398 1070991_0.docx @ 7762 @ @ 1