Sintratec S1 - Emptying of collecting tray

Cleaning and servicing
Sintratec S1 BA_S1_en 1.1 51 / 76
Pos: 172 /Sintratec /Kap./Reinigung & Instandh altung/Auffang wanne leeren @ 3 \mod_1466 057732003_6556. docx @ 943 8 @ 3 @ 1
8.2.4 Emptying of collecting tray
Fig.
30
: Emptying of collecting tray
1. Open the door.
2. Pull out the collecting tray (1) and empty it into a clean container.
3. Place the collecting tray back in the device.
Note
Residual powder can be re-used after treatment (see "Treating the residual
powder" section).
For information on disposal of residual powder: see "Disposal" section.
Pos: 173 /Sintratec /+++++++ + Seitenumbruch ++++ ++++ @ 3\ mod_146398 1070991_0.docx @ 7762 @ @ 1