Sintratec S1 - Symbols, abbreviations and presentation; Scope

About this manual
Sintratec S1 BA_S1_en 1.1 9 / 76
Pos: 24 /Sintrat ec/Überschrifte n/2. Ebene/Q - T/ Symbole, Abkürz ungen und Dars tellung @ 3\mod_14639 81242142_6556.d ocx @ 8461 @ 2 @ 1
2.4 Symbols, abbreviations and presentation
Pos: 25 /Sintrat ec/Kap./Zu dies er Anleitung/Sym bole und Ab kürzungen @ 3\ mod_1463981 398785_6556.d ocx @ 8756 @ @ 1
The most important abbreviations used in this manual are shown below.
Abbreviation
Description
EU
European Union
AC
Alternating current
DC
Direct current
IP
Protection class
PA 12
Polyamide 12 (nylon)
SD card
Secure Digital memory card
IR
Infrared
STL file
"STereoLithography" 3D file
USB
Universal serial bus
Manner of presentation
• Handling instructions are numbered.
• Information is presented using a bullet point list.
• Figures are numbered and explained in a legend.
Note
This symbol with the signal word "Note" is used to indicate useful tips and
recommendations as well as general information for an efficient and fault-free
operation of the device.
Figures
Figures are used to facilitate basic understanding and may not correspond
precisely to the actual version of the device.
Pos: 26 /Sintrat ec/Überschrifte n/2. Ebene/E - H/G eltungsbereic he @ 3\mo d_1463981184102 _6556.docx @ 8191 @ 2 @ 1
2.5 Scope
Pos: 27 /Sintrat ec/Kap./Zu dies er Anleitung/Gelt ungsbereiche @ 3\mod_1463 981398489_65 56.docx @ 8 736 @ @ 1
• The device conforms to the European Union directives for the "machinery"
product group.
• Please note in this regard
– the CE Declaration of Conformity provided
– the intended use of the device
– improper use of the device
Pos: 28 /Sintrat ec/++++++++ S eitenumbruch +++ +++++ @ 3\ mod_1463981 070991_0.doc x @ 7762 @ @ 1