: Replacing a rear container wall
5. Loosen 2 screws (1) inside carriage.
6. Carefully move the rear container wall (2) laterally and upwards and then
remove it.
7. Fit the new rear container wall by applying the preceding two steps but in
reverse.
8. Refit the rear cover by applying the first four steps but in reverse.
Pos: 188 /Sintratec /+++++++ + Seitenumbruch ++++ ++++ @ 3\ mod_146398 1070991_0.docx @ 7762 @ @ 1
To Next Page
Loading...