Strap Adjustm ent
A ll M odels except Summit
A03F0QB
1
TYPICAL
1. Increase or decrease strap length by bolting to a different hole
Coupling Blocks — Handling
SC-4 Suspension Only
• Ride at m oderate speed and check for desired handling.
• If handling requires adjustment, tur n both left and right blocks by
90 t o the desired position.
N O TE: There are four possible adjustment positions. Side of block
with the desired adjustment number must be facing the rubber stop-
per.
WARNING
Both block s must be set at the sam e positi on. O therw ise ve-
hicle be hav ior may be unpredic table and suspension may be-
come warped.
Use tool provided in tool bag to adjust coupling blocks.
148
_________________________
To Next Page
Loading...
Need help?
General
