Skyjack SJ6832 RTE Series User Manual

Rough Terrain Electric Scissors
December 2007 Page 27
Section 2 - Familiarization Function Tests
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
FAMILIARIZATION
• Test Driving
1. Ensure path of intended motion is clear.
2. On platform control console, select lift/
drive switch to “ ” drive position.
3. Activate and hold “ ”enable trigger
switch.
4. Slowly move controller in “ ” forward or
“ ” reverse direction until aerial platform
begins to move, and then return handle to
center position.
Result: Aerial platform should move in
forward or reverse direction, and then
come to a stop.
• Test Elevated Drive Speed
WARNING
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
1. Ensure path of intended motion is clear.
2. Raise the platform until approximately a
height of 2 meters is reached and attempt
to drive forward or reverse.
Result: Aerial platform should move slower
than when it is in stowed position.
Horn Pushbutton
Lift/Drive Switch
Emergency Stop
Button
Lift/Drive/Steer
Controller
Rocker Switch
Lift/Drive/Steer Enable
Trigger Switch
Inclined Drive/Level
Drive Switch

Skyjack SJ6832 RTE Series Specifications

General

Working Height	38 ft
Platform Height	32 ft
Lift Capacity	1, 000 lbs
Drive Speed	3.5 mph
Gradeability	30%
Drive Speed (Stowed)	3.5 mph
Maximum Working Height	38 ft
Capacity	1, 000 lbs
Overall Width	68 in
Weight	3, 629 kg
Drive Speed (Elevated)	0.8 km/h
Turning Radius (Outside)	4.27 m
Fuel Tank Capacity	45.4 L
Platform Length	2.44 m
Platform Width	0.76 m
Power Source	Diesel / Electric
Overall Length	130 in
Stowed Height (Rails Up)	2.08 m
Stowed Height (Rails Folded)	1.85 m
Turning Radius (Inside)	5 ft