EasyManuals Logo

Skyjack SJ6832 RTE Series User Manual

Skyjack SJ6832 RTE Series
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Page 46 December 2007
Rough Terrain Electric Scissors
Component Identification (Special Options) Section 3 - Operation
HPP Refueling Procedure - Diesel
This section provides the operator with the procedure
on how to refuel the HPP with diesel.
WARNING
Do not smoke in an area where HPPs are
stored or refueled.
Use extreme caution while refueling the
HPP.
Ensure HPP and aerial platform are turned
off before refueling.
Refuel fuel tank only in a well ventilated
area away from open flame and other
sources of ignition, authorized by your
employer and supervisor.
Use ultra low sulfur fuel only.
1. Ensure HPP and aerial platform are turned off and
emergency stop buttons are depressed.
2. Let HPP cool for at least three minutes before
removing fuel cap.
3. Carefully pour fuel into tank ensuring that no
spillage occurs.
4. Secure fuel cap.
5. Ensure there are no leaks in the fuel system.
6. Wipe up any spilled fuel.
7. Dispose of rags in an approved container.
NOTE
For maintenance, refer to HPP manual.
Protection of Environment from Chemical Dangers
WARNING
Diesel and engine oil are chemicals,
which can contaminate the environment.
If they are spilled during filling and reach
the water, they can cause damage to the
environment, e.g., death of fish. For such
damage, the party responsible is liable!
Therefore, diesel and engine oil must
not get into the sewage system, streams,
rivers or other surface water. For that
reason, immediately remove the dripped
off or spilled diesel or engine oil with
appropriate means and dispose of these
means according to the regulations.
DANGER
HPP fuels are combustible. Inspect the
aerial platform in an open, well-ventilated
area away from heaters, sparks and
flames. Always have an approved fire
extinguisher within easy reach.
DANGER
Failure to detect and correct fuel leaks
will result in an unsafe condition. An
explosion or fuel fire may cause death or
serious injury.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skyjack SJ6832 RTE Series and is the answer not in the manual?

Skyjack SJ6832 RTE Series Specifications

General IconGeneral
Working Height38 ft
Platform Height32 ft
Lift Capacity1, 000 lbs
Drive Speed3.5 mph
Gradeability30%
Drive Speed (Stowed)3.5 mph
Maximum Working Height38 ft
Capacity1, 000 lbs
Overall Width68 in
Weight3, 629 kg
Drive Speed (Elevated)0.8 km/h
Turning Radius (Outside)4.27 m
Fuel Tank Capacity45.4 L
Platform Length2.44 m
Platform Width0.76 m
Power SourceDiesel / Electric
Overall Length130 in
Stowed Height (Rails Up)2.08 m
Stowed Height (Rails Folded)1.85 m
Turning Radius (Inside)5 ft

Related product manuals