Name: Skyjack SJ6832 RTE Series
Brand: Skyjack
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Rough Terrain Electric Scissors

December 2007 Page 51

Section 3 - Operation Start Operation

3.8-5 To Drive Forward or Backward

WARNING

Be aware of blind spots when operating

the aerial platform.

WARNING

Ensure that there are no personnel

or obstructions in the path of travel,

including blind spots.

1. Activate platform control console (refer to

Section 3.8-3).

2. On platform control console, select lift/drive switch

to “ ” drive position.

3. Activate and hold “ ” enable trigger switch.

4. Move controller handle “ ” forward or

“ ” backward to desired speed and direction

of platform travel.

5. Return controller to neutral center position to stop.

Release “ ” enable trigger switch.

WARNING

To protect against unintended movement

of the aerial platform, push in the

emergency stop button after you have

arrived at your desired location or

elevation.

3.8-6 To Steer

1. Activate platform control console (refer to

Section 3.8-3).

2. On the platform control console, turn lift/drive

switch to “ ” drive position.

3. Activate and hold “ ” enable trigger switch.

4. Press “ ” rocker on top of controller handle in

either direction to steer.

NOTE

Steering is not proportional. Driving and

steering may be active at the same time.

Questions and Answers:

Need help?

Do you have a question about the Skyjack SJ6832 RTE Series and is the answer not in the manual?

Skyjack SJ6832 RTE Series Specifications

General