Skyjack SJ6832 RTE Series User Manual

Page 38 December 2007
Rough Terrain Electric Scissors
Component Identification Section 3 - Operation
3.5 Component Identification
The following descriptions are for identification,
explanation and locating purposes only.
3.5-1 Manual Storage Box
This weather-resistant box is mounted
on the platform railings. It contains
the operating manual, EC declaration
and other important documentation.
The operating manual for this make
and model of aerial platform must be
stored in this box.
3.5-2 Maintenance Support
1
Figure 3-1. Maintenance Support
1. Maintenance Support - The maintenance support
is a safety mechanism designed to support the
scissor assembly. When properly positioned, it can
support the scissor assembly and empty platform.
The maintenance support must be used when
inspection and/or maintenance is to be performed
within the lifting mechanism. Refer to Section 3.12
for how to use the maintenance support.
WARNING
The maintenance support must be used
when inspection and/or maintenance or
repairs are to be performed within the
lifting mechanism. Failure to use this
safety mechanism could result in death
or serious injury.
WARNING
Do not reach through the scissor
assembly when the platform is raised
without the maintenance support properly
positioned. Failure to avoid this hazard
could result in death or serious injury.

Skyjack SJ6832 RTE Series Specifications

General

Working Height	38 ft
Platform Height	32 ft
Lift Capacity	1, 000 lbs
Drive Speed	3.5 mph
Gradeability	30%
Drive Speed (Stowed)	3.5 mph
Maximum Working Height	38 ft
Capacity	1, 000 lbs
Overall Width	68 in
Weight	3, 629 kg
Drive Speed (Elevated)	0.8 km/h
Turning Radius (Outside)	4.27 m
Fuel Tank Capacity	45.4 L
Platform Length	2.44 m
Platform Width	0.76 m
Power Source	Diesel / Electric
Overall Length	130 in
Stowed Height (Rails Up)	2.08 m
Stowed Height (Rails Folded)	1.85 m
Turning Radius (Inside)	5 ft