Chapter 1 Welcome
smarttech.com/kb/171744 11
Mounting hardware
You can use VESA compliant wall mounts, such as SMART’s WM-SBID-200 wall mount (not included), to
mount the display on a wall (see
Installing the display on a wall
on page18).
You can also mount the display on a mobile stand (see
Accessories
on page14).
Front control panel
The front control panel provides buttons for turning the display on and off, controlling the volume,
accessing the display’s settings or freezing the screen, going back in the screen’s navigation history, and
displaying the Home screen.
Remote control and infrared sensor
The display’s infrared sensor is located in the control panel in the bottom-right corner of the display’s
frame.
You can use the remote control to turn the display on and off, adjust display settings, and quickly open
applications.
Ambient light sensor
The ambient light sensor is located in the bottom-right corner of the display’s frame. The sensor detects
the brightness of the room and adjusts the screen’s brightness accordingly.
Power status
The indicator light’s color indicates the display’s status:
Power button Display status
Off Not receiving power
Red (solid) Standby mode
Red (flashing) Firmware update in progress
Green Normal operating mode
Writing, drawing, and erasing
The display comes with two pens you can use to write or draw on the screen. Each end of a pen can be
assigned to write or draw in a different color. You can erase digital ink by moving your fist or palm over
the digital ink.
To Next Page
Loading...
Need help?
General
