SMART Board GX - Page 12

Chapter 1 Welcome
smarttech.com/kb/171744 12
With Object Awareness
1
, the display responds automatically to the tool or object you’re using, whether
it’s a pen, finger, or palm.
Audio
The display includes two 15 W integrated speakers.
Network connectivity
The display requires a network and internet connection for downloading software and firmware
updates.
The display requires a network and internet connection for downloading software and firmware
updates.
You can connect the display to a network using Wi-Fi or an Ethernet cable.
l
The Wi-Fi module supports both 2.4 and 5 GHz bands.
l
The two RJ45 jacks allow you to connect the display and an external device, such as a computer, to
an Ethernet network.
For more information, see Connecting to a network on page23.
Front connector panel
The front connector panel includes connectors for USB peripherals and a computer or other input.
For more information, see Connecting room computers and guest laptops on page32 and Connecting
USB drives and other peripherals on page42.
Room computers and guest laptops
You can connect room computers and guest laptops to the display and view and interact with them.
The display comes with SMART software that you can install on connected computers to take full
advantage of the display’s features.
For more information, see Connecting room computers and guest laptops on page32.
1
When connected to a computer with SMART Product Drivers