Chapter 2 Installing the display
smarttech.com/kb/171744 30
3.
Tap the Network icon > Ethernet.
4.
Turn on the Connect switch.
5.
To obtain an IP address automatically, select the DHCP checkbox.
OR
To configure an IP address manually, select the Static checkbox, input the IPaddress, gateway,
network prefix length (netmask bit count), and DNSaddress, and tap Save.
To configure a wireless hotspot
Notes
l
The wireless hotspot feature is available when the display is connected to the network with an
Ethernet connection.
l
When the wireless hotspot is enabled, the display’s Wi-Fi connection is disabled.
1.
Press the Settings button on the front control panel.
2.
Tap the Network icon > Hotspot.
3.
Enable the Hotspot Switch option.
4. Type a hotspot name in the
Hotspot Name
text box (or use the default name).
5. In the
Security
field, tap the drop-down list and select a method of encryption.
6.
Click Show Password and record the system generated (default) password or type your own
password. This password is required when users connect their devices to the wireless hotspot.
7. Select a bandwidth frequency (2.4 GHz or 5 GHz).
Note
The default setting is 2.4 GHz. Select 5g to choose a 5 GHz bandwidth frequency. This also
enables the channel selection drop-down list from which you can choose from a range of Wi-Fi
channels.
8.
Tap Enter.
To connect to the display’s wireless hotspot
1. On a computer or mobile device, view the list of available Wi-Fi networks and select the display’s
wireless hotspot.
2. Type the password for the display’s wireless hotspot.
3. Connect to the display’s wireless hotspot.
To Next Page
Loading...
Need help?
General
