Important information
smarttech.com/kb/171744 5
l
You must connect the USB cable that came with the display to a computer that has a USB
compliant interface and that bears the USB logo. In addition, the USB source computer must be
compliant with IEC 60950-1 and/or IEC 62368-1. The source computer must be CE marked and
carry safety certification marks for Canada and USA. This is for operating safety and to avoid
damage to the display.
l
Wait five minutes after disconnecting power from the display before removing accessories from
the display’s OPS slot to allow the accessory to cool.
Important
The following table includes the normal operating power requirements for the display:
Models Regulatory
Models
Power requirements
SBID-GX165 IDGX65-1 100V to 240V AC, 50 Hz to 60 Hz, 117 W
SBID-GX175 IDGX75-1 100V to 240V AC, 50 Hz to 60 Hz, 157 W
SBID-GX186 IDGX86-1 100V to 240V AC, 50 Hz to 60 Hz, 175 W
For additional requirements and other information, refer to the display’s specifications (see
More
information
on page15).
To Next Page
Loading...
