Appendix B Adjusting source, image mode, audio mode, and menu settings
smarttech.com/kb/171744 88
Option Values Function Notes
HDMI EDID EDID 1.4
EDID 2.0
Sets the HDMI-EDID version of the
display’s active HDMI connector to
EDID 1.4 or EDID 2.0.
Note
EDID 1.4 is the default.
When EDID 1.4 is selected, the
display will present itself as an HDMI
1.4 compliant device.
When EDID 2.0 is selected, the
display will present itself as an HDMI
2.0 compliant device.
Note
This setting can be applied
differently to each HDMI input
source.
HDR Auto
Low
Middle
High
Reference mode
Enable or disable High Dynamic
Range display information when
connected to external display.
If the source device also supports
HDR, changes to the HDR option can
increase the variance between dark
and bright images.
HDMI OUT 1920 × 1080
3840 × 2160
Sets the HDMI out resolution. Ensure the device that receives the
display’s HDMI out signal matches
the selected output resolution.
For best results, make sure the
device that receives the display’s
HDMI out signal uses the same
resolution settings as the display.
Tip
Use 1920 × 1080 if the screen
resolution of the connected
device isn’t known.
Eco Reset [N/A] Resets the display’s settings to the
most energy efficient modes.
[N/A]
To Next Page
Loading...
Need help?
General
