SMART KAPP-IQ65-V2 Installation And Maintenance Guide

APPENDIX C
REMOTELY MANAGING THE DISPLAY
102 smarttech.com/kb/171167
Source
Use the following commands to identify source settings.
Command Response Possible values Standby
mode
get input input=[Value] hdmi1
ops/hdmi2
Yes
get videoinputs videoinputs=[Value] hdmi1
ops/hdmi2
Yes
Use the following commands to assign source settings.
Command Possible values Response Standby
mode
set input [Value] =hdmi1
=ops/hdmi2
input=[Value] Yes
Video
Use the following commands to identify video settings.
Command Response Possible values Standby
mode
get displaymode displaymode=[Value] standard
user
dynamic
No
get contrast contrast=[Value] 0–100 No
get brightness brightness=[Value] 0–100 No
get tint tint=[Value] 0–100 No
get sharpness sharpness=[Value] 0–100 No
get colortemp colortemp=[Value] normal
warm
cool
user
No
get red red=[Value] 0–100 No
get green green=[Value] 0–100 No
get blue blue=[Value] 0–100 No
get blacklevel blacklevel=[Value] 0–100 No

SMART KAPP-IQ65-V2 Specifications

General

Brand	SMART
Model	KAPP-IQ65-V2
Category	Monitor
Language	English