SMART KAPP-IQ65-V2 Installation And Maintenance Guide

CHAPTER 8
TROUBLESHOOTING
68 smarttech.com/kb/171167
Resolving issues with remote management
See Resolving issues with remote management on page114.
Troubleshooting the display’s software
This section explains how to troubleshoot the display’s software.
Resolving general issues
Issue Solutions
An app or feature is missing or not
available.
l The apps and features available depend on the iQ appliance model.
See the Identifying your iQ appliance model wizard.
l The iQ system software may not include that feature or app.
See the iQ system software release notes.
l The app may be disabled.
See Launcher on page84.
The iQ apps and features do not
appear when the display is turned
on.
l The display’s input source is not the iQ appliance. Make sure the correct input is
selected.
l Wait for a minute after first turning on the display or switching the input source to
the iQ appliance. This delay may be longer immediately after upgrading the iQ
system software.
l The iQ appliance has stopped responding during startup or after a system
software update. Turn off the display, unplug the power cable and wait at least
30 seconds before reconnecting the power cable and turning on the display.
There is no content from the HDMI
video out connector.
The connected HDMI sync device (for example, a display, video splitter, video
extender or video capture system) may not support High-Bandwidth Digital
Content Protection (HDCP).
Make sure the sync device is able to receive and display HDMI content that is
protected by HDCP. For more information, see SMART Board interactive flat
panels and High-bandwidth Digital Content Protection (HDCP).
When updating the iQ system
software with a USB drive, the
update process doesn’t start.
l The iQ system software version already installed may be newer than or the
same version as the version on the USB drive.
Compare the version number of the current iQ system software with the version
number of the upgrade file on the USB drive.
l Follow the installation instructions provided on SMART’s website when updating
the iQ system software.
TIPS
o
Make sure the USB drive is FATformatted.
o
Make sure the file has not been renamed or unzipped. The file should
be copied to the USB drive unmodified.
o
Make sure the file is located in the root folder on the USB drive.
o
Make sure the USB drive is inserted in the USBreceptacle on the
display’s frame or to a USB receptacle on the iQ appliance, and not in a
connected computer’s USB receptacle or extension cable.
Annotations appear only in the
Browser and Screen Share apps.
Currently, only the Browser and Screen Share apps support ink and
annotations.

SMART KAPP-IQ65-V2 Specifications

General

Brand	SMART
Model	KAPP-IQ65-V2
Category	Monitor
Language	English