SMART KAPP-IQ65-V2 Installation And Maintenance Guide

CHAPTER 4
CONFIGURING THE DISPLAY
32 smarttech.com/kb/171167
Turning on the display for the first time
Turn on the display after mounting it and connecting power and devices.
Turning on and setting up the display for the first time
To turn on and set up the display for the first time
1. Flick the switch beside the AC power inlet to the ON(I) position.
2. Follow the on-screen instructions to calibrate the display.
IMPORTANT
Use the pen, rather than your finger, when calibrating the display.
3. Select your preferred language, and then tap Next.
4. Select your country, and then tap Next.
5. Select your time zone, and then tap Next.
6. Set the date, and then tap Next.
7. Set the time, and then tap Next.
8. Name the display, and then tap Next.
9. If the display isn’t using a wired network connection, select a wireless network, and then tap
Next.
10. Select the list of applications that will appear in the launcher, and then tap Next. For more
information about the apps, see the SMARTBoard 6000 and 6000 Pro series interactive
displays user’s guide (smarttech.com/kb/171166)

SMART KAPP-IQ65-V2 Specifications

General

Brand	SMART
Model	KAPP-IQ65-V2
Category	Monitor
Language	English