Navigating the Web Browser Interface
3-5
3
Engine ID Sets the SNMP v3 engine ID on this switch 3-36
Remote Engine ID Sets the SNMP v3 engine ID for a remote device 3-37
Users Configures SNMP v3 users on this switch 3-37
Remote Users Configures SNMP v3 users from a remote device 3-40
Groups Configures SNMP v3 groups 3-41
Views Configures SNMP v3 views 3-45
Security 3-46
User Accounts Assigns a new password for the current user 3-46
Authentication Settings Configures authentication sequence, RADIUS and TACACS 3-48
HTTPS Settings Configures secure HTTP settings 3-52
SSH 3-54
Settings Configures Secure Shell server settings 3-59
Host-Key Settings Generates the host key pair (public and private) 3-57
Port Security Configures per port security, including status, response for
security breach, and maximum allowed MAC addresses
3-59
802.1X Port authentication 3-60
Information Displays global configuration settings 3-62
Configuration Configures the global configuration setting 3-62
Port Configuration Sets parameters for individual ports 3-63
Statistics Displays protocol statistics for the selected port 3-66
ACL 3-67
Configuration Configures packet filtering based on IP or MAC addresses 3-67
Port Binding Binds a port to the specified ACL 3-73
IP Filter Sets IP addresses of clients allowed management access via
the web, SNMP, and Telnet
3-74
Port 3-76
Port Information Displays port connection status 3-76
Trunk Information Displays trunk connection status 3-76
Port Configuration Configures port connection settings 3-78
Trunk Configuration Configures trunk connection settings 3-78
Trunk Membership Specifies ports to group into static trunks 3-81
LACP 3-82
Configuration Allows ports to dynamically join trunks 3-82
Table 3-2 Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
Need help?
General
