System Configuration
5-56
5
System Log Settings
The wireless AP/Router supports a logging process that controls error messages
saved to memory or sent to a Syslog server. The logged messages serve as a
valuable tool for isolating wireless AP/Router and network problems.
The System Log Settings page controls the type of logging message that the
wireless AP/Router can send.
Figure 5-56. System Log Settings
• System Log – Enables local storage of system logs concerned with the wireless
AP/Router only. (Default: Disabled)
• Log Level – Configures the minimum severity level
for event logging. The system allows you to limit the
messages that are logged by specifying the minimum
severity level.
(Default: 4 Warning)
- 1 Alert – An error condition requiring immediate
user intervention to prevent a problem.
- 2 Critical – An error condition that may require user intervention.
- 3 Error – An error condition that does not cause significant problems with normal
operation.
- 4 Warning – An error condition that does not cause system problems but may
require attention.
- 5 Notice – A system condition that does not cause system problems but should
be noted.
- 6 Info – Informational message only.
- 7 Debug – Sends the lowest level of system log messages only. Debug
messages carry information for debugging software.
- Disabled – Disables sending of any logging messages.
To Next Page
Loading...
Need help?
General
