System Configuration
5-4
5
Network Settings
The Network Settings pages allow you to manage basic system configuration
settings.
Note: In AP mode, the wireless AP/Router’s Network Settings options are significantly
reduced.
Management IP
Assigns an IP address for connecting to the wireless AP/Router. Click on "Network
Settings" followed by "Management IP.”
Figure 5-22. IP Settings (AP mode)
Date/Time Configures NTP settings Both 5-57
Ping Test Performs a loopback test on a specified IP address Both 5-59
Management 5-60
Admin Enables remote administration and configures user accounts
for control of the unit
Both 5-60
Config Backups and restores the configuration data and restores the
factory defaults
Both 5-62
Firmware Upgrades system software from a local file and enables
provisioning updates
Both 5-63
Information 5-63
System Information Displays the current system status Both 5-63
Routing Table Displays information on configured routes Router 5-66
Packet Statistics Displays received and sent packet statistics Both 5-67
System Log Displays the system message log Both 5-68
3G Access History Displays the 3G access history. Both 5-69
Table 5-1. Configuration Options
Menu Description Mode Page
To Next Page
Loading...
