WAN Setting
5-9
5
• WAN IP Alias – Adds more than one IP address to the network interface for
multiple connectivity.
- Enable: Enables the specified IP address.
- Add: Specifies a WAN IP alias.
- Change: Changes the already specified IP alias.
- Delete: Deletes the IP alias.
PPPoE
Enable the wireless AP/Router IP address to be assigned automatically from an
Internet service provider (ISP) through an ADSL modem using Point-to-Point
Protocol over Ethernet (PPPoE).
Figure 5-26. WAN Settings for PPPoE (Router mode)
PPPoE — Configures PPPoE.
• PPPoE MTU: Sets the maximum packet size that the WAN port may transmit. The
Maximum Transmission Unit (MTU) is expressed in bytes. (Default:1492 bytes)
To Next Page
Loading...
