LAN Setting
5-19
5
LAN Setting
The wireless AP/Router must have a valid IP address for management using a web
browser and to support other features. The unit has a default IP address of
192.168.2.1. You can use this IP address or assign another address that is
compatible with your existing local network. Click on "Network Settings" followed by
"LAN."
Figure 5-33. LAN Settings (Router mode)
• LAN IP Address – Valid IP addresses consist of four decimal numbers, 0 to 255,
separated by periods. The default setting is 192.168.2.1.
• Subnet Mask – Indicate the local subnet mask. (Default: 255.255.255.0. )
• DNS Proxy – Enables DNS proxy on the LAN port. (Default: Enabled)
To Next Page
Loading...
Need help?
General
