Initial Configuration
4-16
4
5. WLAN1/WLAN2 Security — Sets the wireless security encryption key for the
wireless network.
Figure 4-18. Setup Wizard - WLAN1 Security
Authentication Mode – Configures the authentication mode used by clients.
See “Authentication Mode” on page 5-29 for more information.
(WLAN1/WLAN2 Defaults: Open)
6. Click Finish & Reboot after completing the configuration changes. Note that all
configuration changes are not saved until the Setup Wizard is completed and
the system has restarted.
When the system restarts, a countdown window displays for 60 seconds.
Figure 4-19. Implementing Wizard Settings
To Next Page
Loading...
