SMC Networks WBR14-3GN User Manual

Firewall
5-49
5
- Change: By selecting a packet filtering configuration from the table its
parameters display in an editable form. Click "Change" to save parameters once
you have updated them.
- Add: Adds a newly configured packet filter that denies forwarding in to the local
area network to the list.
- Edit: Click "Edit" to highlight a packet filtering rule in the list for changing its
parameters.
- Delete: Deletes a packet filtering rule from the list.
LAN Packet Filter — Globally enables LAN packet filtering. (Default: Enabled,
maximum 32 entries are allowed.)
•Enable – Enables the filtering rule on a specified IP address and TCP/UDP port.
(Default: Enabled)
• Source IP – Specifies the IP address to block LAN traffic from.
• Destination Port – Specifies the port to block traffic from the specified LAN IP
address from reaching.
•Protocol – Specifies the destination port type, TCP or UDP. (Default: TCP)
•Block – Specifies if traffic should be blocked "Always" or configured "by Schedule."
•Day – Specifies the day or days of the week on which to block traffic.
•Time – Specifies the time of day during which to block traffic.
• Action – Specifies an action to take on the LAN packet filtering configuration.
- Change: By selecting a packet filtering configuration from the table its
parameters display in an editable form. Click "Change" to save parameters once
you have updated them.
- Add: Adds a newly configured packet filter that denies forwarding in to the local
area network to the list.
- Edit: Click "Edit" to highlight a packet filtering rule in the list for changing its
parameters.
- Delete: Deletes a packet filtering rule from the list.
MAC Packet Filter — Globally enables MAC packet filtering. (Default: Enabled,
maximum 32 entries are allowed.)
•Enable – Enables the filtering rule on a specified MAC address. (Default: Disabled)
• MAC Address – Specifies the MAC address to block traffic from.
•Block – Specifies if traffic should be blocked "Always" or configured "by Schedule."
•Day – Specifies the day or days of the week on which to block traffic.
•Time – Specifies the time of day during which to block traffic.
• Action – Specifies an action to take on the MAC packet filtering configuration.
- Change: By selecting a packet filtering configuration from the table its
parameters display in an editable form. Click "Change" to save parameters once
you have updated them.
- Add: Adds a newly configured packet filter that denies forwarding in to the local
area network to the list.

SMC Networks WBR14-3GN Specifications

General

Brand	SMC Networks
Model	WBR14-3GN
Category	Wireless Router
Language	English