Service Settings
5-53
5
• DHCP Static Map – Maps client MAC addresses to static IP addresses. This
allows specified clients to always be assigned the same IP when they request
settings. (Maximum 32 entries are allowed.)
- MAC: The physical layer address used to uniquely identify the static IP address
to be assigned to the specified client MAC address. The IP address must be in
the same subnet as the wireless AP/Router..
- IP: The static IP address to be assigned to the specified client MAC address. The
IP address must be in the same subnet as the wireless AP/Router.
- Description: An optional brief description that can be used to help identify the
client device.
- Action: Specifies changes or additions to the DHCP static map table.
- Change: By selecting an already configured DHCP static map its parameters
display in an editable form. Click “Change” to save parameters once you have
modified them.
- Add: Adds a newly configured DHCP static map to the list.
- Edit: Click “Edit” to highlight an entry in the static DHCP client list for changing
its parameters.
- Delete: Deletes a DHCP static map from the list.
• DHCP Client List – Lists information about associated DHCP clients.
- Type: Describes the type of DHCP client.
- Hostname: The hostname of the DHCP client.
- MAC: The MAC address of the DHCP client.
- IP: The IP address of the DHCP client.
- Description: Optional description of the DHCP client.
- Expire Time: The time after which the connection will expire and the DHCP
client must request a new IP address.
To Next Page
Loading...
Need help?
General
