Snell Sirius 830 - Audio Redundancy - Nucleus2 2463 Controller Only

To Next Page

To Previous Page

Sirius 800 www.snellgroup.com Crosspoint Faults and Replacement

7.5.2 Audio Redundancy - Nucleus2 2463 Controller Only

The audio redundant crosspoint algorithm is enabled or disabled by using the Online Editor.

See the Workbench manual for information on using the Online Editor.

Nucleus2 (2463) Controller Navigate to:

Devices | Devices[1]: LocalRouterDevice | LocalRouterControl |

RouterSpecificControl: Sirius800Control | RedundantAudioXpntControl

| Enabled = True

Select the required action from the drop down menu:

• Redundant crosspoint algorithm enabled = True

• Redundant crosspoint algorithm disabled = False

Important:

• If audio redundancy is enabled or disabled the controller must be reset for the new

setting to take effect.

• If the action on fail setting (see section 7.6) for video or audio needs to be changed

make these changes at the same time and only one database push is then

required.

• In a dual controller system both controllers must have the same redundancy

settings.