46
v1.02
Admin and Installation Guide M900 Description of Settings
Settings descriptions for Handset subpages:
Setting Description
Location In multicell installations, select from drop-down menu if more than one base-
station available
IPEI To find the IPEI, open the Settings menu of the handset, select Status (Fig. 7),
and press Select. On the Status screen (Fig. 8), scroll down to the IPEI at the
end of the handset status. The IPEI consists of a string of 10 decimals and
capital letters. Do not enter the colons grouping the characters of the string
into twos.
AC This is the access code for registering the handset at the base station.
The default is 0000 (four times zero). NOTE: This access code is not to be
confused with either the PIN for resetting the handset to factory values or
for deregistering it from the base station (default also 0000) or the PIN for
accessing the mailbox.
Alarm Line This is the extension number the handset is registered for (not available on
M25.)
Alarm Number This is the phone number the handset will call when the emergency alarm
button is pressed. (not available on M25.
Alarm Profiles (alarm button configurable for M65, M70, M80, M85, and M90; not available on M25). For more
information, see "Emergency alarm" on page 30 and "Alarm" on page 72.
Profile If an alarm profile has been configured on the Alarm page and a profile alias
was assigned, it will be shown in parentheses following the number of the
profile (i.e, Profile 0 (Shop)). Click on the checkbox of a profile to select.
Alarm Type If an alarm profile has been configured on the Alarm page, this item will say
Alarm Button.
Import Local Phonebook
These are the individual contacts stored on your handset only and accessible via the symbol on the
handset's display.
Note: Not to be confused with the central directory downloaded onto the base station on the Central
Directory page and accessible to all handsets registered at the base station by pressing the symbol
(see "Local central directory" on page 31).
Click on Browse and select the file from the directory of your PC, then click on Load. The file must adhere
to the same formats as those for the local central directory (see "Preparing the phone directory file" on page
31 ).
Export Local Phonebook
These are the individual contacts on your handset, accessible via the symbol on the handset's display.
The file is exported to your PC as a comma-separated values (csv) file.
To Next Page
Loading...
