70
v1.02
Admin and Installation Guide M900 Description of Settings
Setting Description
DECT property Base station characteristics in connection to the current multi cell network.
Possible output(s):
• Primary: Primary base station all other nodes in the chain synchronize to.
• Locked: The base station is currently synchronized and locked to the
primary.
• Searching: The base station is in the process of locating to a DECT sync
source.
• Free Running: A locked base station that suddenly lost synchronization to
the primary.
• Cell empty: No current connection information from base station.
• Assisted lock: Base station has lost DECT sync source, and Ethernet is
used for synchronization.
• Sync. Lost: Handset has an active DECT connection with the base station
but the base station has lost connection to DECT sync source. The base
station will continue to work as long as the call is active, then go into search
mode when the call is terminated.
Base station name The name that was assigned to the base station in the settings on the
Management page and that also appears at the top of its web interface, within
the base station group, and in the DECT chain of a multicell installation.
DECT Chain
Primary or Level 1 - 12 The DECT chain (also called DECT tree) is the graphic depiction of the levels
and connections of the synchronized base stations and repeaters listed in the
"Base Station Group" table.
Button Reboot chain The reboot will start when there are no calls in the system.
Button Force reboot chain The reboot will start immediately, and ongoing calls will be dropped.
Button Reconfigure DECT tree DECT chain will be reconfigured
To Next Page
Loading...
