socomec ATyS C55 User Manual

6
EN
ATySController C55/65 - 549866C - SOCOMEC
1. GENERAL SAFETY INSTRUCTIONS
• This manual provides instructions on safety, connections instructions on the SOCOMEC ATyS C55 / C65 ATS controller.
• Whether the ATyS C55 / C65 is sold as a loose product, as a spare, in a kit or as part of an enclosed solution or in any
other conguration, this device must always be installed and commissioned by qualied and experienced personnel, in line
with the manufacturers recommendations, following good engineering practices and after having read and understood the
details in the latest release of the relative product instruction manual.
• Maintenance on the product and any other associated equipment including but not limited to servicing operations must be
performed by adequately trained and qualied personnel.
• Each product is shipped with a label or other form of marking including rating and other important specic product
information. One must also refer to and respect markings on the product prior to installation and commissioning for values
and limits specic to that product.
• Using the product outside the intended scope, outside SOCOMEC recommendations or outside the specied the
specied ratings and limits can cause personal injury and/or damage to equipment.
• This instruction manual must be made accessible so as to be easily available to anyone who may need to read it in
relation to the use, installation or maintenance of the ATyS C55/C65
• The ATyS C55/C65 meets the requirement for the IEC 60947-6-1 standard for transfer switching equipment and the IEC
61010-2-201 standard for control equipment; the product includes the labels and marking with details on each standard.
• No covers on the ATyS C55/C65 should be opened (with or without voltage) as there may still be dangerous voltages
inside the product such as those from external circuits.
• Do not handle any control or power cables connected to the ATyS C55/C65 when voltages may be present on the
product directly through the mains or indirectly through external circuits.
• Voltages associated with this product may cause injury, electric shock, burns or death. Prior to carrying out any
maintenance or other actions on live parts in the vicinity of exposed live parts, ensure that the switch including all control
and associated circuits are de-energized.
DANGER WARNING CAUTION
RISK:
Electric shock, burns, death
RISK:
Possible personal injury
RISK:
Equipment damage
• The ATyS C55/C65 complies with the following international standards:
- IEC 60947-6-1 – Transfer switching equipment
- EC 61010-2-201 – Control equipment
- IEC 61010-1 – Electrical safety requirements
- Annex C of GB/T 14048.11
Refer to the specic references numbers on this document to order the correct products and associated accessories.
The information provided in this instruction manual is subject to change without notice, remains for general information
only and is non-contractual.

socomec ATyS C55 Specifications

General

Brand	socomec
Model	ATyS C55
Category	Controller
Language	English